Deutsch
English
News
Seite 1 von 15

Applications - Application 24

Applications - Application 24

Plastic Domes fix a circuit board in a plastic component. Material PA6-GF30. Dom diameter about 3,2mm. more...


Applications - Application 23

Applications - Application 23

In total 8 approximately 3 mm measuring pins, a lid is placed and fixed by heat staking. The Dome measured in the unformed state approximately 6mm in diameter. Material: PA more...


Applications - Application 22

Applications - Application 22

A metal sheet is fixed by the heat staking process at several positions in a plastic housing. The plastic is standard unfilled plastic (ABS). The dome measuring about 2 mm in diameter. more...


Applications - Application 19

Applications - Application 19

The connection pins of the electronic component are fixed mechanically by staking of the U-shaped elements in oval domes. Material PBT-GF20 more...


Applications - Application 14

Applications - Application 14

Plastic-plastic heat staking application. Permanent connection of two mating parts. Dom diameter about 2.9 mm. Material PBT-GF20 more...


Applications - Application 12

Applications - Application 12

Classic Plastic PCB heat staking application. Fixing a circuit board in a plastic body, a total of 10 pins with a diameter of 2.1 mm are formed in one single step to domes of 3.7mm. Material PA6-GF3 more...


Applications - Application 15

Applications - Application 15

Unfilled frame of plastic heat staked for fixing a printed circuit board. Dom diameter approx 3.6mm. Material PC more...


Applications - Application 21

Applications - Application 21

Plastic pins are formed on a circuit board to fix it permanently to the plastic body. Pin diameter approx 1.4mm, the Dom measures 2.5mm. more...


Applications - Application 10

Applications - Application 10

A greater number of metal plates are fixed in only one single heat staking process. The pins measure approximately 1.3mm, the dome about 2.2mm. The material is a PA6-GF3 more...


Applications - Application 13

Applications - Application 13

Staking a shielding plate in a plastic housing(PP-T20). The Dome measure approximately 3.6 mm in diameter. more...


Applications - Application 9

Applications - Application 9

In order to fix a circuit board on a plastic body several pins are reshaped to doms. The pins measure before staking 1.6mm, dome measuring 2.6mm. The material is a PA6-GF20 more...


Applications - Application 8

Applications - Application 8

Classical pin to dom application. Pin diameter before staking around 2,9mnm, Dom about 4.8mm. Material: PEI more...


Applications - Application 11

Applications - Application 11

Forming of multiple pins with a diameter of 0.8mm to 1.5mm domes. Fixing a plastic cover on a support frame. Plastic: PP more...


Applications - Application 20

Applications - Application 20

Fixing a transparent plastic lid on a bottom part, material is PMMA. The dome measuring about 4 mm in diameter. more...


Product Jigs - Example 5

Product Jigs - Example 5

Product jig with assembly fixture for the soldering of an LCD-connection flex on a PCB. Placing in of the PCB and the display (incl. housing), adjusting of the flex in x-axis and following Hot Bar Soldering of the connection. After the soldering process the display and the housing are moved onto the PCB and snapped into place. After the assembling process the fixture can be opened and the product can be removed. more...


Product Jigs - Example 4

Product Jigs - Example 4

Product jig with assembly fixture for the soldering of an LCD-connection flex on a PCB. Placing in of the PCB and the display (incl. housing), adjusting of the flex in x-axis and following Hot Bar Soldering of the connection. After the soldering process the display and the housing are moved onto the PCB and snapped into place. After the assembling process the fixture can be opened and the product can be removed. more...


Dispensing Systems - Example 4

Dispensing Systems - Example 4

Customized Dispensing Systems - In-line System with XYZ-Axis-System. We offer engineering, planning, design and implementation of complete production cells. Our dispensing components can be integrated into existing production systems or supplied as suitable complete solutions. more...


Standard-Systems - BL40i - Sliding Table 1

Standard-Systems - BL40i - Sliding Table 1

Hot Bar Soldering System with automatic rotary table (Desktop-edition). Diameter of turntable: 330mm. On the turntable of the system there are mounting possibilities for 2 product jigs. Simultanous loading / unloading and soldering. The turntable is actuated by a drive wheel, launched by a two-handed release. The turntable is locked automatically and the Hot Bar Soldering process is initiated. The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door). Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints). Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options. Quick-change system for soldering bars with plug-in connector and mounting device on a p more...


Standard-Systems - HS40iXXL

Standard-Systems - HS40iXXL

Standard Heat Seal System/Heat Seal System HS40iXXL Stand-alone system with 2-position turntable. High accuracy temperature regulation to suit the pulse heating technique. Heating rails from 5 to 300mm can be connected. Pneumatic adjustment of the heat seal head with respect to the product. The heating rails are semi-gimballed and the suspension is a balancing system to create an even co-planar application of the heater rails to the sealing faces. There is automatic compensation for known imbalances of the product. There is triple temperature monitoring of the heater rails and the smallest temperature irregularity is identified by the system. Optionally, the heat seal head can be fitted with an integrated force- and path measurement system. For most applications, a thermally conductive silicon belt is inserted between the heater rail and the product. This more...


Customized Solutions - Example 1

Customized Solutions - Example 1

Hot Bar Soldering System, Inline design with 3 working stations Adaption to an Asys linear transport system. Transport of product jigs is from left to right with automatic indexing of the carriers. The products that are placed on the carriers are fluxed with our patentedFlux-Applicator in station 1. A defined amount of flux is applied automatically onto the solder joints in a reliable process. Flux application is done within a few seconds. Thus two Hot Bar Soldering stations can follow one flux station. Both of the two following Hot Bar Soldering Stations are equipped with 3 soldering bars each. Each soldering bar is controlled separately by the control PLC and, therefore, can be set up differently according to product specifications. Path sensors at each soldering unit measure the height of the parts and detect the path that the soldering bar sinks into the more...