Deutsch
English

Application 2

Heat staking application for fixing a circuit board in a plastic body.

The circuit board is located in an injection moulding part with prepared parts.

The plastic domes fed through the circuit board are formed into a rivet by the die, so that the circuit board is fixed in the plastic part.

Thermoplastic materials such as PA, PP, PBT, POM, PC and PE (also with glass fibre content) are caulked.

Heat Staking - Application 2
Product Images
  • Application 2Application 2
  • Application 2Application 2
  • Application 2Application 2

Application 7

Heat staking application for fixing a circuit board in a plastic body.

The circuit board is located in an injection moulding part with prepared parts.

The plastic domes fed through the circuit board are formed into a rivet by the die, so that the circuit board is fixed in the plastic part.

Thermoplastic materials such as PA, PP, PBT, POM, PC and PE (also with glass fibre content) are caulked.

Heat Staking - Application 7
Product Images
  • Application 7Application 7
  • Application 7Application 7
  • Application 7Application 7

Application 8

Classical pin to dom application. Pin diameter before staking around 2,9mnm, Dom about 4.8mm.
Material: PEI

Heat Staking - Application 8
Product Images
  • Application 8Application 8
  • Application 8Application 8
  • Application 8Application 8

Application 9

In order to fix a circuit board on a plastic body several pins are reshaped to doms. The pins measure before staking 1.6mm, dome measuring 2.6mm. The material is a PA6-GF20

Heat Staking - Application 9
Product Images
  • Application 9Application 9
  • Application 9Application 9
  • Application 9Application 9

Application 10

A greater number of metal plates are fixed in only one single heat staking process. The pins measure approximately 1.3mm, the dome about 2.2mm. The material is a PA6-GF3

Heat Staking - Application 10
Product Images
  • Application 10Application 10
  • Application 10Application 10
  • Application 10Application 10

Application 11

Forming of multiple pins with a diameter of 0.8mm to 1.5mm domes. Fixing a plastic cover on a support frame. Plastic: PP

Heat Staking - Application 11
Product Images
  • Application 11Application 11
  • Application 11Application 11
  • Application 11Application 11
Beispiel
Application 6
Application 7
Application 8
Application 9
Application 10
Beispiel

10 / 21

Applications Overview