Deutsch
English

Example 2

Double Hot Bar Soldering System with rotary table.

Stand-alone edition.
Diameter of turntable: 500mm

Soldering system for soldering stranded wires with two separately working soldering bars.

On each jig there are two products that can be soldered simultaneously.

After manual turning the table, flux is applied onto the joint components (soldering area and stranded wires) with a profiled dispensing nozzle (MV2000 dispensing valve).

Both the flux unit and the soldering unit are fixed to an x-axis. The units are moved above the jig as required.

After the flux process the hot bar soldering process takes place.

The system is equipped with an automatic cleaning station for the soldering bar.

The cleaning process takes place during the flux application and, therefore, does not affect the cycle time.

Hot Bar Soldering - Example 2
Product Images
  • Example 2Example 2
  • Example 2Example 2
  • Example 2Example 2

Example 11

Hot Bar Soldering System with sliding table (Desktop-Edition).

Product jig on the sliding table.

Dimensions of sliding table: 300x300mm

The workpiece holder can be loaded when the sliding table is withdrawn.

Standard: Manual movement of the sliding table.

Option: Automatic drive.

The table is locked automatically and the Hot Bar Soldering process is initiated.

A basic camera system supports the operator when inserting the products into the jig.

Hot Bar Soldering - Example 11
Product Images
  • Example 11Example 11
  • Example 11Example 11
  • Example 11Example 11

Example 12

Hot Bar Soldering System with rotary table ("Desktop"-Edition).

On the turntable of the system there are two product jigs.

Diameter of turntable: 300mm.

Simultaneous loading / unloading and soldering.

Turntable can be turned manually.

Option: Automatic drive.

Soldering bar with Kapton foil feeder.

A basic camera system supports the operator when inserting the products into the jig.

Hot Bar Soldering - Example 12
Product Images
  • Example 12Example 12
  • Example 12Example 12
  • Example 12Example 12

Example 13

Hot Bar Soldering System with sliding table (Desktop-Edition).

Product jig on the sliding table.

Dimensions of sliding table: 300x300mm

The workpiece holder can be loaded when the sliding table is withdrawn.

Standard: Manual movement of the sliding table.

Option: Automatic drive.

The table is locked automatically and the Hot Bar Soldering process is initiated.

A basic camera system supports the operator when inserting the products into the jig.

Hot Bar Soldering - Example 13
Product Images
  • Example 13Example 13
  • Example 13Example 13
  • Example 13Example 13

Example 14

Hot Bar Soldering System with rotary table ("Desktop"-Edition).

On the turntable of the system there are two product jigs.

Diameter of turntable: 300mm.

Simultaneous loading / unloading and soldering. Turntable can be turned manually.

Option: Automatic drive.

Soldering bar with Kapton foil feeder.

A basic camera system supports the operator when inserting the products into the jig.

Hot Bar Soldering - Example 14
Product Images
  • Example 14Example 14
  • Example 14Example 14
  • Example 14Example 14

Example 15

Hot Bar Soldering System with working stations (In-line Design).

With a total of 5 working stations for flux application on different positions of the PCB and for soldering different components.

A manually slidable product jig can be moved from the left to the right to the relevantspective working position.

The processes can be initiated at the push of a button.

A light curtain monitors the open front of the system, protecting operators against unintended access to the processing area.

Flux application with two flux applicators.

Hot Bar Soldering with two separate and independent soldering heads.

Hot Bar Soldering - Example 15
Product Images
  • Example 15Example 15
  • Example 15Example 15
  • Example 15Example 15
Beispiel
Example 10
Example 11
Example 12
Example 13
Example 14
Beispiel

15 / 29

Customized Solutions Overview