Product jig for the positioning of a ribbon cable on a PCB.

The cable is held in position by vacuum.

Fine adjustment of the conductor paths of the cable on the soldering pads of the PCB by means of an adjusting screw.

Product jig for the soldering of stranded wires.

Different supports can be mounted on the basic construction with an XY- stage.

Clamping device for the cable.

Double product jig for the soldering of ribbon cables.

Two products can be positioned in the jig simultaneously.

Each is held in position by means of a clamping device.

The soldering areas are thermally insulated.

Product jig with assembly fixture for the soldering of an LCD-connection flex on a PCB.

Placing in of the PCB and the display, adjusting of the flex in x-axis and then Hot Bar Soldering of the connection.

Double product jig for the soldering of single stranded wires on PCBs.

The wires are guided in grooves and are each fixed and held in position by a clamping device.

The clamping devices can be opened on the touch of a button after the soldering process.

Detailed information: Positioning of stranded wires on the soldering areas of the PCBs.

The wires are guided in grooves and are held in position by a clamping device.

A "comb" made of sheet metal ensures the correct position of the wires.

The insulation of the stranded wires is stopped by the comb.

Just the stripped and pre-tinned part of the wires is allowed to touch the soldering pads.

The removal of the finished parts is facilitated by an ejector mechanism.