Page 6 of 11
Multiple Dispensing Nozzles are equipped with a variety of separate dispensing needles.
The needles are arranged according to product-specific geometries.
Complex dispensing tasks can be solved in a short time.
Greater amounts of material can be applied quickly.
Multiple dispensing nozzles are used for static dispensing tasks i.e. recurring shapes.
Different types of needles with different cross sections can be used for every multiple dispensing nozzle. more...
Very robust diaphragm dispensing valve.
Due to its simple design this valve is very easy to handle and simple to maintain.
The membrane is made of Teflon and the through-flow body is made of stainless steel.
The through-flow body is equipped with a heating.
The temperature range can be adapted to customer requirements.
The heating control system monitors and controls the valve set temperature with an accuracy of up to + /-1K.
The valve lift is adjustable and can optionally be monitored by a sensor (dispensing control). more...
Example for construction of a standard Hot Bar Soldering system Bl40i XXL. more...
Example for construction of a Hot Bar Soldering system.
In-line system with a total of 4 stations (2 stations for flux application and 2 stations for Hot Bar Soldering). more...
Example for construction of a Hot Bar Soldering system with rotary table.
System with automatic flux application and one Hot Bar Soldering unit. more...
Hot Bar Soldering System with rotary table.
Stand-alone edition.
Diameter of turntable: 500mm
Soldering of stranded wires on aluminium oxide PCBs.
Two hot bar soldering heads.
Jig is designed for two products each.
On the turntable of the system there are mounting possibilities for 2 product jigs.
Path measurement system for measuring the height of parts and the sinking results.
Flux application systems (manual and automatic).
Data communication and data storage of all parameters and measured values in the soldering process.
Components for remote maintenance to grant our technicians access to the PLC control for diagnostics and programming.
Automatic Kapton foil feeder
Measurement dummies for reproducible measurings of temperature, path and force (for machine capability studies, cmk/cpk-evaluation). more...
Double Hot Bar Soldering System with rotary table.
Stand-alone edition.
Diameter of turntable: 500mm
Soldering system for soldering stranded wires with two separately working soldering bars.
On each jig there are two products that can be soldered simultaneously.
After manual turning the table, flux is applied onto the joint components (soldering area and stranded wires) with a profiled dispensing nozzle (MV2000 dispensing valve).
Both the flux unit and the soldering unit are fixed to an x-axis. The units are moved above the jig as required.
After the flux process the hot bar soldering process takes place.
The system is equipped with an automatic cleaning station for the soldering bar.
The cleaning process takes place during the flux application and, therefore, does not affect the cycle time. more...
Example for construction of a standard Hot Bar Soldering system Bl40i with linear sliding table. more...
Example for construction of a Hot Bar Soldering system for the integration into a XYZ-axis system.
The soldering head is equipped with a rotating mechanism (90°), a force measuring device and a path monitoring device. more...
Exchangeable soldering heads.
The solderings bars with their suspension systems can easily be changed over by means of a quick release system.
The complete Kapton foil feeder can be changed over with its base plate.
As a result, the soldering system can be very quickly changed over for the production of different parts. more...
Double Hot Bar Soldering System with rotary table.
Stand-alone edition.
Diameter of turntable: 500mm
Soldering of OLEDs on PCBs.
Exchangeable soldering heads.
The solderings bars with with their suspension systems can easily be changed over by means of a quick release system.
The complete Kapton foil feeder can be changed over with its base plate.
As a result, the soldering system can be changed over very quickly for the production of different parts. more...
Double Hot Bar Soldering System with rotary table and 6 stations.
Stand-alone edition.
Diameter of turntable: 800mm
Hot Bar Soldering System with double product jig and double soldering unit.
Turntable is divided in 6 stations:.
1. Manual station
2. Flux application
3. Camera system AOI
4. Hot Bar Soldering station
5. Electrical testing station
6. Marking station (Marking of IO / NIO- parts) more...
Hot Bar Soldering System, inline design with 3 working stations.
Adaptation to a Bosch linear transport system.
Transport of product jigs is from left to right with automatic indexing of the carriers.
The products that are placed on the carriers are fluxed in station 1.
A defined amount of flux is applied automatically onto the solder joints in a reliable process.
Flux application is done within a few seconds.
Thus two Hot Bar Soldering stations can follow one flux station.
Both of the two following Hot Bar Soldering Stations are equipped with 1 soldering bar each.
Each soldering bar is controlled separately by the control PLC and, therefore, can be set up differently according to product specifications.
Path sensors at each soldering unit measure the height of the parts and detect the path that the soldering bar sinks into the melting soldering depot.
Sy more...
Double Hot Bar Soldering System with rotary table.
Stand-alone edition.
Diameter of turntable: 400mm
Soldering system for different soldering tasks and different products.
Exchangeable product jigs and soldering bars. In just a few minutes the whole system can be converted to handle a different product type.
The product- specific jigs are easy to change over.
The turntable is electrical driven.
First of all, flux is applied onto the joint components (soldering area and stranded wires) with a profiled dispensing nozzle (MV2000 dispensing valve).
Both the flux unit and the soldering unit are fixed to an x-axis. The units are moved above the jig as required.
After the flux process, the hot bar soldering process takes place.
System is equipped with an automatic cleaning station for the soldering bar and an automatic Kapton foil feeder.
The cleaning process take more...
Hot Bar Soldering System (Inline-edition) with two working stations.
Adaptation to a Bosch linear transfer system.
The transport of the jigs is from the left to the right with automatic indexing of the jigs in the stations.
The products placed on the jigs are soldered in two separate stations.
The first Hot Bar Soldering station is equipped with one soldering bar, the second station has two soldering bars.
Each soldering bar is controlled separately and, therefore, can be set depending on different product specifications.
Path sensors on each soldering unit measure the height of the products and detect the sinking paths of the soldering bars into the melting soldering pot.
System is equipped with possibilities for communication and data logging (traceability). more...
Hot Bar Soldering System with sliding table (Desktop-Design).
Product jig on the sliding table.
Dimensions of sliding table: 300x300mm
The workpiece holder can be loaded when the sliding table is withdrawn.
Standard: Manual movement of the sliding table.
Option: Automatic drive.
The table is locked automatically and the Hot Bar Soldering process is initiated more...
Hot Bar Soldering System with sliding table ("Desktop"-Design).
Product jig on the sliding table.
Dimensions of sliding table: 300x300mm
The workpiece holder can be loaded when the sliding table is withdrawn.
Standard: Manual movement of the sliding table.
Option: Automatic drive
The table is locked automatically and the Hot Bar Soldering process is initiated. more...
Hot Bar Soldering System with sliding table in Desktop-design.
Jig on the sliding table.
Dimensions of sliding table: 300x300mm.
The workpiece holder can be loaded when the sliding table is withdrawn.
Manual movement of the sliding table.
The table is locked automatically and the Hot Bar Soldering process is initiated more...
Hot Bar Soldering System with sliding table - Designed as seated work position.
Jig on the sliding table.
Dimensions of sliding table: 200x300mm
The workpiece holder can be loaded when the sliding table is withdrawn.
Manual movement of the sliding table.
The table is locked automatically and the Hot Bar Soldering process is initiated. more...
Hot Bar Soldering System with sliding table (Desktop-Design).
Product jig on the sliding table.
Dimensions of sliding table: 300x300mm
The workpiece holder can be loaded when the sliding table is withdrawn.
Standard: Manual movement of the sliding table.
Option: Automatic drive.
The table is locked automatically and the Hot Bar Soldering process is initiated.
A basic camera system supports the operator when inserting the products into the jig. more...
Deutsch
English
Standard-Systems
